Tahoe 4WD V8-6.2L (2009)
9. Remove the caliper bracket (1) and brake caliper as an assembly.
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
10. Remove the caliper guide pin bolts from the caliper bracket.
Support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic brake hose from the caliper.
11. Remove the brake pads from the caliper bracket.
12. Remove the retaining springs.
Installation Procedure
1. Install the retaining springs to the caliper bracket.
2. Install the brake pads.
