Tahoe 4WD V8-6.2L (2009)
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
2. Remove the drain plug.
3. Remove the fill plug.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the drain plug and tighten to 33 Nm(24 lb ft).
2. Fill the rear drive axle.
*
Use the proper fluid, refer to Approximate Fluid Capacities (See: Specifications).
*
For the proper capacity, refer to Fluid and Lubricant Recommendations (See: Specifications).