Tahoe 4WD V8-6.2L (2009)
6. Install the evaporator tube nut to the evaporator and tighten to 16 Nm(12 lb ft).
7. Install the surge tank hold down nut and bolt and position aside.
8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair).
9. Install the upper radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Yukon) (See: Engine, Cooling
and Exhaust/Cooling System/Radiator/Service and Repair)Radiator Air Upper Baffle and Deflector Replacement (Cadillac) (See: Engine,
Cooling and Exhaust/Cooling System/Radiator/Service and Repair).
10. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging (HP2) (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging)Refrigerant Recovery and Recharging (Non-HP2) (See: Heating and Air
Conditioning/Service and Repair/Procedures/Refrigerant Recovery and Recharging).
11. Leak test the fittings of the components using the J 39400-A .
Suction Hose Replacement (W/C69)
Suction Hose Replacement (W/C69)
