Tahoe 4WD V8-6.2L (2009)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Actuator Replacement
Camshaft Position Actuator Replacement
Special Tools
*
EN 46330 Timing Belt Tensioner Retaining Pin
*
J 45059 Angle Meter
Removal Procedure
1. Remove the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (RPOs LC9, LMG, LY2, LY5) (See: Engine,
Cooling and Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair)Oil Pump, Screen, and Crankshaft Oil Deflector Replacement
(Except RPOs LC9, LMG, LY2, LY5) (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair).
2. Remove and discard the camshaft position (CMP) actuator solenoid valve (234).
