Tahoe 4WD V8-6.2L (2009)
4. Open the fuel tank clips (1, 3, 4, and 5) and remove the EVAP lines from the clips.
5. Disconnect the EVAP line quick connect fittings at the fuel tank module and vent valve. Refer to Plastic Collar Quick Connect Fitting Service (
See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
6. Remove the EVAP lines from the fuel tank.
Installation Procedure
1. Install the EVAP lines to the fuel tank.
