Tahoe 4WD V8-6.2L (2009)
4. Slide the fuel level sensor down off of the bucket.
Installation Procedure
1. Slide the fuel level sensor up onto the bucket until the sensor engages the retaining tab (1).
2. Connect the fuel level sensor electrical connector (1) under the module cover.
3. Install the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (2500 LWB - 98.4L (26 gal) Tank Front) (See: Fuel Delivery
and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) (See:
Fuel Delivery and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (1500 Series) (See: Fuel Delivery
and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) (See:
Fuel Delivery and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank
Rear) (See: Fuel Delivery and Air Induction/Fuel Pump/Service and Repair).
