Tahoe 4WD V8-6.2L (2009)
1. Install the ground strap to the vehicle.
2. Install the ground strap terminal to the stud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the engine ground strap nut at the front plenum panel.
Tighten the nut to 9 Nm(80 lb in).
4. Position the ground strap to the rear of the left cylinder head.
Tighten the bolt to 16 Nm(12 lb ft).
5. Install the engine ground strap bolt to the rear of the left cylinder head.
6. Install the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair).
