Tahoe 4WD V8-6.2L (2009)
6. Remove the battery jumper cable nut (2) from the generator.
7. Remove the battery jumper cable terminal (1) from the generator stud.
8. Remove the generator bolts.
9. Remove the generator.
Installation Procedure
1. Install the generator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bolts.
Tighten the generator bolts to 55 Nm(41 lb ft).
