Tahoe 4WD V8-6.2L (2009)
7. Slide the starter forward until the starter clears the transmission and properly support the starter.
8. Lower the vehicle half way.
9. Remove the right front wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair).
10. Working through the right wheel well opening, remove the engine wiring harness lead nut (1).
11. Remove the engine wiring harness lead terminal (2) from the starter.
12. Remove the starter solenoid cable clip bolt (2) from the frame.
