Tahoe 4WD V8-6.2L (2009)
Adhesives, Fluids, Lubricants, and Sealers ().
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the actuator (1 or 3) and tighten to 20 Nm(15 lb ft)..
3. Connect the electrical connector to the actuator.
4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement (See: Service and Repair/Removal and Replacement/Front
Drive Axle/Shield Replacement).
5. Lower the vehicle.
