Tracker 2WD L4-1.6L VIN 6 (2000)
4. Use a cloth in order to pull off the snap ring which secures the front side door window regulator handle (1), if equipped.
5. Remove the window regulator handle (1), if equipped.
6. Remove the left front side master window switch, if equipped. .
7. Gently pry the front side door trim panel (3) from the front side door by disengaging the plastic retainers which secure the panel.
8. Remove the door trim panel (3) from the vehicle.
INSTALLATION PROCEDURE
1. Install the front side door trim panel (3) to the front side door. Ensure that the plastic retainers are fully engaged.
2. Install the left front side master window switch, if equipped.