Tracker 2WD L4-1.6L VIN 6 (2000)
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 4 bolts (1) which secure the rear door lower hinge (2) to the rear door.
Tighten the rear door lower hinge mounting bolts to 34 N.m (25 lb ft).
3. Install the right tail lamp. Refer to Tail Lamp Replacement.
Rear Door Hinge Replacement (Upper)
Rear Door Hinge Replacement (Upper)
Removal Procedure
1. Remove the rear door hinge cover (1) from the vehicle by gently prying in order to release the plastic retainers that retain the cover.
2. Remove the 2 bolts (2) that retain the rear door upper hinge (1) to the rear door.
3. Remove the 3 bolts (2) that retain the rear door upper hinge (1) to the rear door jamb.
4. Remove the rear door upper hinge (1) from the vehicle.
Installation Procedure