Tracker 2WD L4-1.6L VIN 6 (2000)
1. Open the front side door in order to gain access to the rear side door upper hinge bolts.
2. Mark the position of the rear side door upper (4) and lower hinges to the rear side door (3).
3. Mark the position of the rear side door upper hinge to the door jamb.
4. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement (4 Door) (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Center Pillar Lower Trim Panel Replacement (4 Door)) in Interior Trim.
5. Remove the 2 bolts (1) and the nut which secure the upper hinge to the door jamb (2).
6. Remove the rear side door check pin (2).
7. Support the rear side door (2) using a floor jack (1) and piece of wood.
8. Remove the 2 bolts (2) which secure the upper hinge (4) to the door (3).
