Tracker 2WD L4-1.6L VIN 6 (2000)
Carpet: Service and Repair
Front Floor Panel Carpet Replacement (2 Door)
Front Floor Panel Carpet Replacement (2 Door)
Removal Procedure
1. Remove the front seats Refer to Front Seat Replacement - Bucket (See: Seats/Service and Repair/Front Seat Replacement - Bucket) in Seats.
2. Remove the rear floor console. Refer to Rear Floor Console Replacement (See: Console/Service and Repair/Rear Floor Console Replacement) in
Instrument Panel, Gauges and Console.
3. Remove the front floor console. Refer to Front Floor Console Replacement (See: Console/Service and Repair/Front Floor Console Replacement)
in Instrument Panel, Gauges and Console.
4. Remove the front floor foot rest. Refer to Foot Rest Replacement (See: Trim Panel/Service and Repair/Foot Rest Replacement) .
5. Remove the following components from each side of the vehicle:
1. The 4 plastic retainers (2)
2. The front side door sill trim plate (1)
6. Remove the body hinge pillar trim panels. Refer to Body Hinge Pillar Trim Panel Replacement (Left ) (See: Trim Panel/Service and Repair/Body
Hinge Pillar Trim Panel Replacement (Left ))Body Hinge Pillar Trim Panel Replacement (Right) (See: Trim Panel/Service and Repair/Body
Hinge Pillar Trim Panel Replacement (Right)) .
7. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (2 Door) (See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion
Replacement (2 Door))Rear Seat Cushion Replacement (4 Door) (See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Replacement (4
Door)) in Seats.
8. Remove the 2 plastic retainers (2) which secure each side of the front floor panel carpet (1) to the bulkhead.
9. Remove the front floor panel carpet (1) from the vehicle.
Installation Procedure