chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body Hinge Pillar Trim Panel Replacement (Left )|Page 8781 > < Body Hinge Pillar Trim Panel Replacement (Left )|Page 8779
Page 18
background image

8. Lower the roof panel trim (1) by gently prying loose the plastic retainers which secure the panel.

9. Remove the interior lighting wiring harness (2) from the roof panel trim (1).

10. Remove the roof panel trim (1) from the vehicle.

Installation Procedure

1. Install the roof panel trim (1) to the vehicle.
2. Route and tape the interior lighting wiring harness (2) to the roof panel trim (1).

3. Install the roof panel trim (1) to the roof panel. Ensure that the plastic retainers are fully engaged.

Body Hinge Pillar Trim Panel Replacement (Left )|Page 8781 > < Body Hinge Pillar Trim Panel Replacement (Left )|Page 8779