Tracker 2WD L4-1.6L VIN 6 (2000)
6. Remove the screw from each side which secures the front folding top material (1) to the front folding top weatherstrip retainer (2).
7. Fold the rear portion of the front folding top material (1) back in order to gain access to the front folding top weatherstrip retainer mounting
screws.
8. Remove the following components from the vehicle:
1. The 4 screws
2. The front folding top weatherstrip retainer (2)
Installation Procedure
1. Install the front folding top weatherstrip retainer (2) to the vehicle. Secure the retainer with the 4 screws.
2. Install the front folding top material (1) to the front folding top weatherstrip retainer (2). Secure the material to the retainer with the 2 screws.
3. Snap the snap (3) which secures each tension strap (1).
