Tracker 2WD L4-1.6L VIN 6 (2000)
4. Pull the rear seat pull strap (2) while raising the back of the rear seat cushion (1).
5. Remove the seat cushion (1) from the vehicle.
Installation Procedure
1. Install the rear seat cushion (5) to the vehicle. Secure the cushion to each rear seat support (2) with the rear seat hinge support pins (4).
2. Install the rear seat stopper rod nut (1) to each support pin (4).
3. Install the rear seat hinge support cover (2) to each rear seat hinge support (1).
4. Lower the seat cushion.
Rear Seat Cushion Replacement (4 Door)
Rear Seat Cushion Replacement (4 Door)
Removal Procedure