Tracker 2WD L4-1.6L VIN 6 (2000)
Parking Brake Cable: Service and Repair
Removal Procedure
1. Ensure the park brake lever is in the released position.
2. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift the console.
3. If the vehicle is equipped with automatic transmission, disconnect the power neutral switch connector.
4. If the vehicle is equipped with an auxiliary power outlet, disconnect the auxiliary power outlet connector.
5. Disconnect the park brake switch connector (10).
6. Remove the park brake cable lock nut (1).
7. Remove the park brake cables from the equalizer.
