Tracker 2WD L4-1.6L VIN 6 (2000)
Radiator Hose: Service and Repair
Radiator Hose Replacement-Outlet
Removal Procedure
Caution: In order to help avoid being burned, do not remove the radiator cap while the engine and the radiator are hot. Scalding fluid and
steam can be blown out under pressure if the cap is removed too soon.
1. Drain the engine coolant. Refer to Draining and Filling Cooling System.
2. Loosen and reposition the hose clamp (1) on the radiator outlet pipe.
3. Loosen and reposition the hose clamp on the radiator outlet hose at the radiator.
4. Remove the radiator outlet hose.
Installation Procedure
