Tracker 2WD L4-1.6L VIN 6 (2000)
1. Install the engine oil pressure sensor (2) to the block.
Tighten
Tighten the engine oil pressure sensor to 15 N.m (11 lb ft).
2. Connect the oil pressure sensor electrical connector.
3. Install the steering linkage skid plate (5) to the vehicle by raising and sliding rearward onto the retaining hook, if equipped. Secure the skid plate
with the 4 bolts (1,2,3,4).
Tighten
Tighten the steering linkage skid plate bolts to 54 N.m (40 lb ft).
4. Lower the vehicle.