Tracker 2WD L4-1.6L VIN 6 (2000)
^
Tighten the timing belt tensioner stud to 11 Nm (97 inch lbs.).
7. Install the timing belt tensioner bolt.
^
Tighten the timing belt tensioner bolt to 27 Nm (20 ft. lbs.).
8. Install the timing belt cover to the engine. Secure the cover with one nut and eight bolts.
^
Tighten the timing belt cover nut and bolts to 10 Nm (89 inch lbs.).
9. Connect the wiring harness conduit to the timing belt cover.
10. Install the crankshaft pulley. Refer to Crankshaft Pulley Replacement.
11. Connect the negative battery cable.
^
Tighten the battery cable to 15 Nm (11 ft. lbs.).
