Tracker 2WD L4-1.6L VIN 6 (2000)
Exhaust Manifold: Service and Repair
Removal Procedure
Caution: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.
3. Remove the following from the exhaust manifold (2):
^
2 nuts
^
3 bolts
^
The upper exhaust manifold heat shield (1)
4. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
5. Remove the following from the exhaust manifold and engine block:
^
2 bolts
^
1 nut
^
The exhaust manifold reinforcement bracket (1)
