Tracker 2WD L4-1.6L VIN 6 (2000)
Control Assembly: Service and Repair
Control Assembly Bulb Replacement
REMOVAL PROCEDURE
1. Remove the Instrument Panel (IP) cluster trim bezel.
2. Pull the knobs (1) from the levers.
3. Gently pry the heater control fascia (4) from the control assembly.
4. Twist and remove the bulb socket (2).
5. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the bulb socket (2).
