Tracker 2WD L4-1.6L VIN 6 (2000)
Receiver Dryer: Service and Repair
RECEIVER DEHYDRATOR REPLACEMENT
REMOVAL PROCEDURE
1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging. See: Refrigerant/Service and Repair
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in Vehicle Lifting.
3. Remove the cap from the bottom of the receiver.
4. Remove the filter from the receiver.
5. Remove the dryer.
INSTALLATION PROCEDURE
IMPORTANT: Add 40 ml (1.3 ft oz) of refrigerant oil to the refrigeration system when installing a new condenser dryer.
