Tracker 2WD L4-1.6L VIN 6 (2000)
Backup Light Bulb: Service and Repair
REMOVAL PROCEDURE
1. Remove the 2 screws (2) which secure the tail lamp assembly (1).
2. Pull the tail lamp assembly (1) rearward in order to access the backup lamp bulb socket (3).
3. Twist the backup lamp bulb socket (3) counterclockwise and remove the socket from the lamp assembly (1).
4. Remove the backup lamp bulb from the backup lamp bulb socket (3).
INSTALLATION PROCEDURE
1. Install the backup lamp bulb to the backup lamp bulb sockets (3).
2. Install the backup lamp socket (3) to the lamp assembly and twist clockwise in order to secure the socket.
