Tracker 2WD L4-1.6L VIN 6 (2000)
Throttle Position Sensor: Service and Repair
REMOVAL PROCEDURE
1. Disconnect TP sensor electrical connector.
2. Remove both fasteners (3).
3. Remove the TP sensor (2).
INSTALLATION PROCEDURE
1. Install TP sensor (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Tighten both fasteners.
Tighten
Tighten both fasteners to 3.5 N.m (30 lb in).
3. Connect the TP sensor electrical connector.
