Tracker 2WD L4-1.6L VIN 6 (2000)
9. Remove the 3 retaining bolts (1) for the fuel rail (3).
10. Remove the fuel rail.
11. Remove the fuel injectors (2).
INSTALLATION PROCEDURE
1. Apply a thin coat of motor oil to the fuel injectors O-rings.
2. Install the fuel injectors (2) to the fuel rail (3).
3. Install the fuel rail (3) to the intake manifold.
NOTE: Refer to Fastener Notice in Cautions and Notices.
4. Install the 3 retaining bolts (1).
Tighten
Tighten the bolts to 30 N.m (22 lb ft).