Tracker 2WD L4-1.6L VIN 6 (2000)
Crankshaft Position Sensor: Description and Operation
Crankshaft Position (CKP) Sensor
The Crankshaft Position (CKP) Sensor is mounted on the engine block, behind the crank pulley. The Powertrain Control Module (PCM) receives a
digital signal from the CKP sensor. The PCM uses the CKP sensor signal in order to determine crankshaft speed. The PCM uses crankshaft speed as one
of the inputs in engine mis-fire monitoring. The CKP sensor is not adjustable.
Operation
Operation
The CKP sensor (4) generates a magnetic field within the magnet (3) and coil (2) assembly. The CKP sensor has a specified air gap between the
sensor core end and the crankshaft signal rotor (1) that is located on the crankshaft. An AC voltage (pulse) is generated in the sensor when crankshaft
rotation causes a change in the magnetic flux. The CKP sensor sends the A/C voltage signal to the powertrain control module (PCM).
