Tracker 2WD L4-1.6L VIN 6 (2000)
28. Route the deployment harness out of the passenger side of the vehicle.
29. Clear the inside and outside of the vehicle of any people or loose and flammable objects.
30. Stretch the driver deployment harness to full length.
31. Completely cover the windshield and front door window openings with a drop cloth.
32. Place a power source, 12V minimum/2A minimum (i.e., a vehicle battery) near the shorted end of the harness.
33. Separate the two ends of the driver frontal deployment harness wires.
34. Connect the driver frontal deployment harness wires to the power source in order to deploy the inflatable restraint steering wheel module.
35. Disconnect the driver frontal deployment harness wires from the power source.
36. Stretch the passenger deployment harness to full length.
37. Place a power source, 12V minimum/2A minimum (i.e., a vehicle battery) near the shorted end of the harness.
38. Separate the two ends of the passenger frontal deployment harness wires.
39. Connect the passenger frontal deployment harness wires to the power source in order to deploy the inflatable restraint IP module.
40. Disconnect the passenger frontal deployment harness wires from the power source.
41. Twist together one end of each wire on the driver frontal deployment harness in order to short the wires.
