Tracker 2WD L4-1.6L VIN 6 (2000)
Seat Belt Height Adjuster: Service and Repair
4 Door
REMOVAL PROCEDURE
1. Remove the upper center pillar trim.
2. Remove the following components from the vehicle:
2.1.
The 2 bolts (2)
2.2.
The front seat shoulder belt retractor tension adjuster (1)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices
1. Install the front seat belt shoulder belt retractor tension adjuster (1) to the vehicle. Secure the adjuster with the 2 bolts (2).
Tighten
Tighten the front seat belt shoulder belt retractor tension adjuster bolts to 35 N.m (25 lb ft).
2. Install the upper center pillar trim.