Tracker 2WD L4-1.6L VIN 6 (2000)
2. Install the seat belt switch wiring harness to the retainers which secure it to the seat cushion frame.
3. Install the front seat inner adjuster finish cover (1) to the front seat inner adjuster (2). Secure the finish cover with the 2 screws (3).
4. Install the front seat assembly.
5. Install the front seat belt (3) to the vehicle. Secure the seat belt with the following fasteners:
^
The screw (1)
^
The mounting bolt (2)
Tighten
Tighten the front seat belt mounting bolt to 35 N.m (25 lb ft).
6. Install the front seat belt lower anchor bolt (3)
