Tracker 2WD L4-1.6L VIN 6 (2000)
Door Switch: Service and Repair
Rear
REMOVAL PROCEDURE
Locations View
1. Open the rear side door.
2. Open the rubber cap (3) in order to gain access to the door jamb switch retaining screw (2).
3. Remove the retaining screw (2) which secures the door jamb switch (1) to the door jamb.
Locations View
4. Disconnect the door jamb switch electrical connector (1).
5. Remove the door jamb switch (2) from the vehicle.
INSTALLATION PROCEDURE
