Tracker 2WD L4-1.6L VIN 6 (2000)
14. Remove the pinion drive lever seal (3) and the plate (4) from the drive housing (1).
15. Remove the gear shaft assembly with the pinion drive lever (4) from the drive housing (1).
16. Pull the overrunning clutch stop ring (4) towards the overrunning clutch assembly (1) and remove the overrunning clutch retaining ring (2).
17. Remove the overrunning clutch stop ring and overrunning clutch assembly from the gear shaft assembly.
18. Remove the internal gear from the gear shaft (3).
Cleaning , Inspection and Testing
TOOLS REQUIRED
^
J 544-01 Tension Scale
^
J 8001 Dial Indicator
^
J 26900-13 Magnetic Base
^
J 26900-5 Vernier Caliper
^
J 39200 Digital Multimeter
NOTE: Do not use grease dissolving solvents for cleaning the overrunning clutch or armature. Solvents dissolve the grease packed in the clutch and
