Tracker 2WD L4-1.6L VIN 6 (2000)
Front Steering Knuckle: Service and Repair
Installation
1. Install the knuckle cap to the knuckle.
2. Install the knuckle (1) to the ball stud (5).
3. Support the lower control arm (111) with a jack.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the 2 nuts (2) and the 2 bolts (1) to the strut bracket.
-
Tighten the nuts and the bolts to 95 Nm (69 ft. lbs.).
5. Remove the jack from the lower control arm.
6. Install a new nut to the lower control arm ball stud.
-
Tighten the nut to 60 Nm (43.5 ft. lbs.).