Tracker 2WD L4-1.6L VIN 6 (2000)
Power Steering Pump: Service and Repair
Assembly
1. Apply wheel bearing lubricant, GM P/N 1051344, or equivalent, to the oil seal lip.
2. Apply DEXRON (R)-III Automatic Transmission Fluid, GM P/N 12346143, or equivalent, to the sliding surface of the shaft (1).
3. Insert the pulley's shaft from the oil seal side of the pump body (2).
4. Apply DEXRON (R)-III Automatic Transmission Fluid, GM P/N 12346143, or equivalent, to the O-rings and fit the O-rings (1,2) to the pump
body.
5. Install the side plate (1) to the pump body. Carefully align the dowel pins on the side plate with the bolt hole (2).
6. Apply DEXRON (R)-III Automatic Transmission Fluid, GM P/N 12346143, or equivalent, to the sliding surface of the rotor (2).