Tracker 2WD L4-1.6L VIN 6 (2000)
Steering Wheel: Service and Repair
Steering Wheel and Column - Tilt
Removal Procedure
-
Tools Required
-
J1859-A Steering Wheel Puller
Caution: Refer to SIR Handling Caution in Cautions and Notices.
1. Disable the SIR System. Refer to Disabling the SIR System in SIR.
2. If you are NOT removing the steering column, ensure the front wheels and tires are in the straight ahead position
3. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
4. Remove the steering shaft nut (2).
5. Use paint in order to place alignment marks (2) on the steering wheel and on the steering shaft. Use these marks as a guide during installation.
Notice: Do not use any steering wheel puller or side screws other than those recommended as the SIR coil assembly is easily damaged if the correct
tools are not used.