Tracker 2WD L4-1.6L VIN 6 (2000)
1. Install the following components to the vehicle:
-
The shock absorber (4)
-
The upper support
-
The upper bushing (2)
-
The lower bushing (3)
-
The lower support
-
The shock absorber nut (1)
2. Secure the shock absorber to the lower bracket with the lower mounting bolt (2) and the lower mounting nut.
3. Remove the floor jack.
4. Lower the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Tighten the nuts and the bolt with the weight of the vehicle on the wheels and tires.
-
Tighten the shock absorber nut to 29 Nm (21.0 ft. lbs.).
-
Tighten the lower nut and bolt (2) to 85 Nm (61.5 ft. lbs.).