Tracker 2WD L4-1.6L VIN 6 (2000)
Throttle Valve Cable/Linkage: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution Service Precautions.
1. Disconnect the negative battery cable (1).
2. Loosen the TV cable locknut (2) and the adjusting nut.
3. Remove the TV cable from the throttle body linkage.
4. Remove the TV cable casing from the TV cable bracket (2) at the throttle body.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
6. Remove 1 bolt and the TV cable retaining bracket from the transmission.
7. Remove the front propeller shaft. Refer to Propeller Shaft Replacement - Front.
8. Remove the transmission range switch. Refer to Transmission Range Switch Replacement.
9. Remove the transmission fluid pan (2) the bolts (3) and the gasket from the transmission. Refer to Automatic Transmission Fluid/Filter Changing.
10. Remove the valve body (14) from the transmission. Refer to Valve Body and Accumulator Pistons Removal.