Tracker 2WD L4-1.6L VIN 6 (2000)
5. Remove the sliding yoke (1) and the two piece propeller shaft assembly from the transmission.
6. Inspect the shaft for dents or other damage. Replace the shaft if the shaft is damaged.
7. Inspect the universal joints for smooth pivoting. If the universal joints bind or appear tight replace the universal joints as assembled.
8. Inspect the sliding yoke splines (1) for excessive wear or damage. If the splines (1) appear worn or rounded, replace the sliding yoke (3).
9. Inspect the sliding yoke for the following:
^
Scoring
^
Burrs
^
Other damage
If the sliding yoke surface appears scored or rough, replace the sliding yoke.
10. Inspect the pinion flange yoke for the following:
^
Cracks
^
Distortion
^
Other damage
If the pinion flange yoke appears damaged or distorted, replace the pinion flange yoke.
Installation Procedure
