Tracker 2WD L4-1.6L VIN 6 (2000)
16. Apply Teflon Pipe Sealant GM P/N 12346004, or equivalent, to the threaded portion of the drain plug.
17. Install the drain plug (2) into the rear axle housing.
^
Tighten the rear plug to 25 Nm (18 ft. lbs.).
18. Refill the rear axle housing with approximately 2.2 liters (4.6 pts) of 80W-90 GI-5 lubricant, GM P/N 12345977, or equivalent. The oil level
should be even with the bottom of the filler plug hole.
19. Install the rear axle housing oil level/filler plug (1) into the rear axle housing.
^
Tighten the plug to 43 Nm (32 ft. lbs.).
20. Remove the drain pan from under the rear axle housing.
21. Lower the vehicle.
