Tracker 2WD L4-2.0L VIN C (1999)
Keyless Entry Receiver: Service and Repair
REMOVAL PROCEDURE
1. Remove the nut (1) which secures the remote control door lock receiver bracket (2).
2. Reposition the receiver bracket (2) in order to access the remote control door lock receiver (6) mounting screws.
3. Remove the 2 retainers (2, 4) which secure the remote control door lock receiver electrical connector (3).
4. Disconnect the receiver electrical connector (3).
5. Remove the following components from the remote control door lock receiver bracket (3):
^
The two screws (1)
^
The remote control door lock receiver (2)
INSTALLATION PROCEDURE
