Tracker 2WD L4-2.0L VIN C (1999)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement - Front
REMOVAL PROCEDURE
1. Raise and support the vehicle on a suitable hoist.
2. Disconnect the front wheel speed sensor electrical connector.
3. Remove the retaining bolt (3).
4. Remove the front wheel speed sensor (1) from the steering knuckle (2).
5. Remove the front wheel speed sensor, sensor harness (2), and harness bracket (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the front wheel speed sensor assembly (1) to the steering knuckle (2).
