Tracker 2WD L4-2.0L VIN C (1999)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake pads.
4. Remove two mounting bolts and the caliper bracket (2) from the vehicle.
5. Remove two caliper pins, with the boots, from the caliper bracket.
INSTALLATION PROCEDURE
1. Install two caliper pins, with boots, to the caliper bracket.
2. Install the caliper bracket (2) to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Secure the caliper bracket with two mounting bolts.
^
Tighten the caliper bracket mounting bolts to 85 Nm (61.5 ft. lbs.).
4. Install the brake pads.
