Tracker 2WD L4-2.0L VIN C (1999)
8. Use the J 37774 in order to install the 2 bearing seals (2) to the hub (1).
9. Apply wheel bearing lubricant, GM P/N 1051344, or the equivalent, to the outer bearings.
10. Install the outer bearings to the hub.
11. Install the bearing washer.
12. Install the hub with the bearings and the seals to the spindle.
NOTICE: Refer to Fastener Notice in Service Precautions.
13. Use the J 37763 in order to install the wheel bearing lock nut (2).
^
Tighten the wheel bearing lock nut to 216 Nm (159 ft. lbs.).
14. Install the front wheel bearing seal lock washer retainer (2). Verify that the screw holes align.
15. Install the 4 screws (1).
