Tracker 2WD L4-2.0L VIN C (1999)
1. Use your hands in order to lift the rear bumper of the vehicle up approximately 38 mm (1.5 inch). Gently remove your hands in order to allow the
vehicle to lower.
2. Use your hands in order to push the front bumper of the vehicle down approximately 38 mm (1.5 inch). Remove your hands in order to allow the
vehicle to rise.
3. Measure the K dimension from the left and the right frame rail to the ground 700 mm (27.56 inch) from the rear wheel centerline (B dimension).
4. If the K dimension is not within 10 mm of the specification, replace the rear springs.
MEASURING THE Z DIMENSION
