Tracker 2WD L4-2.0L VIN C (1999)
Steering Gear: Service and Repair
Power Steering Gear Pipe/Hose Replacement - Inlet
REMOVAL PROCEDURE
1. Use a siphon in order to remove the power steering fluid from the reservoir (6).
NOTICE: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
IMPORTANT: Place a drain pan under the vehicle in order to catch any escaping fluid.
2. Remove the power steering gear inlet hose fitting (5) from the steering gear.
3. Remove the power steering gear inlet hose and the 2 gaskets from the steering gear.
4. Remove the power steering gear inlet hose fitting from the power steering pump (1).
