Tracker 2WD L4-2.0L VIN C (1999)
Fluid Line/Hose: Service and Repair
Transmission Cooler Hoses Replacement
Removal Procedure
1. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
2. Remove the 4 front skid plate bolts.
3. Remove the front skid plate.
4. Place a drain pan or suitable container under the transmission cooler hoses.
5. Remove the 2 screws from the cooler hose retainer clamps (2).
6. Remove the cooler hoses from the cooler hose retainer clamps.
7. Remove the following items from the transmission cooler:
^
The 2 inlet hose clamps
^
The 2 outlet hose clamps
^
The transmission cooler hoses
8. Remove the following items from the inlet and outlet cooler pipes at the transmission:
^
The 2 inlet hose clamps (3)
^
The 2 outlet hose clamps (3)
^
The transmission cooler hoses (1, 2)
Installation Procedure