Tracker 4WD V6-2.5L VIN 4 (2001)
6. Remove the rear side door check pin (2).
7. Support the rear side door (2) using a floor jack (1) and piece of wood.
8. Remove the 2 bolts (2) which secure the upper hinge (4) to the door (3).
9. Remove the 2 bolts which secure the lower hinge to the door (3).
10. Slide the rear side door (3) away from the door jamb in order to gain the necessary clearance to remove the upper hinge (4).
11. Remove the upper hinge (4) from the vehicle.
Installation Procedure
1. Install the rear side door upper hinge (4) to the door jamb by aligning the hinge with the marks made during the removal procedure. Secure the