Tracker 4WD V6-2.5L VIN 4 (2001)
Lower Side Moulding / Trim: Service and Repair
Molding Replacement - Rear Body Side Lower (LT Models)
Molding Replacement - Rear Body Side Lower (LT Models)
Removal Procedure
1. Remove the 3 plastic retainers (1) that retain the rear of the body side lower molding (2).
2. Remove the 3 plastic retainers (2) that retain the front of the body side lower molding (3).
3. Remove the body side lower molding (3) from the vehicle.
Installation Procedure
1. Install the body side lower molding (3) to the body side lower molding bracket. Secure the molding with the 3 plastic retainers (2) that retain the
front of the molding.