Tracker 4WD V6-2.5L VIN 4 (2001)
11. Remove the front floor panel carpet (1) from the vehicle.
Installation Procedure
1. Install the front floor panel carpet (1) to the vehicle.
2. Install the 2 plastic retainers (2) that retain each side of the front floor panel carpet (1) to the bulkhead.
3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (2 Door) (See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion
Replacement (2 Door))Rear Seat Cushion Replacement (4 Door) (See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Replacement (4
Door)) in Seats.
4. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (4 Door) (See: Trim Panel/Service and
Repair/Center Pillar Lower Trim Panel Replacement (4 Door)) .
5. Install the rear side door sill trim plate to the vehicle. Secure the trim plate with the 3 plastic retainers.
6. Install the body hinge pillar trim panels. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side (See: Trim Panel/Service and
Repair/Body Hinge Pillar Trim Panel Replacement (Left )) and Body Hinge Pillar Trim Panel Replacement - Right Side (See: Trim Panel/Service
and Repair/Body Hinge Pillar Trim Panel Replacement (Right)) .
